Super Tacho Pro Correction Machine Manual Author: builder2.hpd-collaborative.org-2020-12-26T00:00:00+00:01 Subject: Super Tacho Pro Correction Machine Manual Keywords: super, tacho, pro, correction, machine, manual Created Date: 9:59:23 PM. Tacho Universal 2008.01 Update & Repair kit is for Tacho Pro 2008 odometer correction tool is a magical tool，Tacho Universal V2008.01 Update& Repair Kit can repair the following troubles: Screen display: Diga update and RESET, No display after powered on, No vehicle list, screen display black strip, Frequently Halting. Product Manuals. DigiCentral Website User Guide Guides you through the initial setup required to use the website and the devices that will connect to it.

EEPROM (Electronically Eraseable and Programmable ROM) is a ROM chip which can be reprogrammed and cleared for many times fast and accurately. EEPROM chips are widely used in many cars and trucks.

How to programming EEPROM with Tacho Pro 2008，please follow the instructions below.

Step 1. Clean the EEPROM chip. Make sure there is no paint or dust on it.

Step 2. Put oscillators on the board together.
Put oscillators on the board together-Tacho Pro 2008

Tacho Pro 2008 Dash Programmer Mileage Change Tool P607 for Tacho Universal cable 11DU for Tacho Universal Dongle CAN Hardware for Tacho Universal Cable BMW OBD2+MB Service Reset for Tacho Universal Cable ALFA156 for Tacho Universal Cable ALFA145146 for Tacho Universal Cable P206 JAEGER for Tacho Universal Cable ALFA166 for Tacho Universal Cable P908 for Tacho Universal Cable ACCORD for Tacho. Tacho Pro V2008 Manual Keretaore Author: wordpress.eu2016futureeurope.nl-2021-01-21T00:00:00+00:01 Subject: Tacho Pro V2008 Manual Keretaore Keywords: tacho, pro, v2008, manual, keretaore Created Date: 1/21/2021 7:29:30 AM.

Step 3: Put the clip on the EEPROM.

Step 4. Connect adapter-board to Tacho Pro 2008 and power up the mileage correction tool.

Step 5. Put the other end of the clip to the 8 pin port on the adapter-board with the red cable on the pin 1 mark.

Step 6. Select the car model on the main menu, and then click OK. The Tacho Pro will then read the EEPROM and enter to the EEPROM menu.

Step 7. Save all data with the menu SAVE if the value shown in the machine is alright.

Tacho Pro Mileage Correction Manual

Step 8. Go to the KM adjustment menu, fill in the new value, and the Tacho 2008 will verify if the EEPROM is successfully programmed.

Step 9. Remove the clip from the EEPROM.

Tacho Pro Mileage Correction Manual

Tacho Pro Mileage Correction Tool